Abstract
Abstract This paper introduces an innovative way to prepare lead zirconate titanate thick films near the morphotropic phase boundary using oil-bath based hydrothermal method with magnetic stirring. Undergoing once nucleation process and four-time crystallization process, approximately 10 µm PZT thick films could be obtained. This PZT film performed good ferroelectric and dielectric property. At room temperature, the coercive field (E c ) and the remnant polarization (P r ) were 37.5 kV/cm and 7 μC/cm 2 , respectively. In the frequency range between 1 kHz to 1 MHz, dielectric constant decreased from 300 to 250 and the dielectric loss was below 0.1. These promising results suggest that the oil-bath based hydrothermal method is a good candidate for PZT film fabrication.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
