Novel Dual-Mode Polarization Insensitive Wide Angular Stable Circular Ring Based Deca-Band Absorber for RCS and EMI Shielding Applications

Abstract

A simple concentric circular ring resonator-based nonreciprocal deca-band absorber is demonstrated in this article. The design primarily consists of two frequency selective surfaces (FSSs) among one is a compliment to the other printed on either side of the 2.4 mm thin FR-4 dielectric substrate. It exhibits near-unity absorption effectively at ten different resonant frequencies over X-Ka bands with an average absorption efficiency of 94.6%. Surface plasmonic resonances are the reason behind the multiband absorption and are illustrated with current profiles at resonant frequencies. The performance is angular stable for both transverse electric and transverse magnetic oblique incidences up to 60 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">o</sup> . The design is compact with a structural periodicity of 0.210 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">${{\boldsymbol{\lambda }}}_{\boldsymbol{o}}$</tex-math></inline-formula> and thickness 0.07 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">${{\boldsymbol{\lambda }}}_{\boldsymbol{o}}$</tex-math></inline-formula> , where <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">${{\boldsymbol{\lambda }}}_{\boldsymbol{o}}$</tex-math></inline-formula> is the lowest resonant peak's free-space wavelength. The 20×20 array of the design prototype is fabricated, and the measured results agree with the full-wave analysis. Bistatic radar cross section (RCS) analysis of the proposed absorber is evaluated along with a conventional microstrip patch antenna at <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">X</i> -band. Since the absorber design is based on complementary FSSs, it can also be utilized as a reflector for the not absorbing frequencies. The novelty lies in the utilization of the dual-side of the substrate made this design compact with a greater number of absorption peaks and good angular stability, making it potential for real-time RCS, and electromagnetic interference and shielding applications.