Abstract

A novel dual-loop optoelectronic oscillator (OEO) based on self-polarization-stabilization technique has been experimentally demonstrated. The input light in each loop will retrace its path through a 45° Faraday rotator and single mode fiber with different length after reflecting off a 45° Faraday rotator mirror. By this way, the polarization state of the output signal is always rotated by 180° from the polarization state of the input signal in each loop even if the round-trip fiber is perturbed by the mechanical vibration or temperature. Moreover, the required fiber length is cut in half due to the round-trip transmission in each path, resulting in higher system stability and more compacter structure. The experimental results show that in an intensity modulator (IM)-based OEO system, this scheme has better phase noise performance than the traditional polarization multiplexing method. Furthermore, to avoid the DC bias drifting problem of IM, a simple phase modulation to intensity modulation convertor by using a polarization-dependent phase modulator and a polarizer is proposed without the need of expensive optical filters or dispersive devices. Based on this scheme, a novel dual-loop OEO using phase modulator and self-polarization-stabilization technique has been experimentally demonstrated. The phase noise of -114.1 dBc/Hz at 10 kHz away from the carrier (10 GHz) is achieved and the side mode suppression ratio is improved to 63 dB.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call