Novel Design of Double Slope Solar Distiller with Prismatic Absorber Basin, Linen Wicks, and Dual Parallel Spraying Nozzles: Experimental Investigation and Energic–Exergic-Economic Analyses

Abstract

Increasing the evaporation zone inside the solar distiller (SD) is a pivotal method for augmenting its freshwater production. Hence, in this work, a newly designed prismatic absorber basin covered by linen wicks was utilized instead of the conventional flat absorber basin to increase the surface area of the vaporization zone in a double-slope solar distiller (DSSD). Meanwhile, for further enhancement of modified DSSD performance, dual parallel spraying nozzles are incorporated underneath the glass cover as a saltwater feed supply to minimize the thickness of the saltwater film on the wick, which enhances the heating process of the wick surface and, consequently, the evaporation and condensation processes are improved. Two double slope distillers, namely a double slope solar distiller with wick prismatic basin and dual parallel spraying nozzles (DSSD-WPB&DPSN) and a traditional double slope solar distiller (TDSSD), are made and tested in the outdoor summer conditions of Tanta, Egypt (31° E and 30.5° N). A comparative energic–exergic-economic analysis of the two proposed solar stills is also conducted, in terms of the cumulative distillation yield, daily energy efficiency, daily exergy efficiency, and cost per liter of distilled yield. The present results show that the cumulative distillation yield of the DSSD-WPB&DPSN was 8.20 kg/m2·day, which is higher than that of the TDSSD by 49.64%. Furthermore, the energy and exergy efficiencies were increased by 48.51% and 118.10%, respectively, relative to TDSSD. Additionally, the life cost assessment reveals that the cost per liter of the distilled yield of the DSSD-WPB&DPSN is decreased by 11.13% compared to the TDSSD.