Abstract
We assess the cultivation of microalgae and possible improvements of photobioreactor (PBR) design and operation. A systematic method based on numerical modeling and experiments was proposed to guide the study of reactor performance. Taking the novel flat plate photobioreactor (FPPBR) with inclined baffles (IBs) as an example, the method was applied to investigate an effective way to improve the cultivation potential of the reactor. To obtain good mass transfer and light utilization, the optimal ratio of baffle opening gap to bioreactor width was 0.25. The algal biomass in the FPPBR with IBs at 3% CO2 aeration and an aeration rate of 0.05 vessel volume per minute (vvm) was 27.08% and 48.34% higher than that of FPPBR without baffles under the same cultivation conditions and higher air aeration rate of 0.15 vvm. The maximum carbon fixation rate increased by 106% when using the IBs under the same 3% CO2 aeration condition. The installation of the optimal IBs made it possible to achieve highly efficient cultivation under low energy aeration input, and it is also a cost-efficient way to increase carbon fixation in the bioreactor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.