Abstract
The massive volume dilation, unsteady solid electrolyte interphase, and weak conductivity about Si have failed to bring it to practical applications, although its potential capacity is up to 4200 mAh g−1. For solving these problems, novel binary regulated silicon–carbon materials (Si/BPC) were done by a sol–gel procedure combined with single carbonization. Analytical techniques were systematically utilized to examine the effects of element doping at several gradients on morphology, structure and electrochemical properties of composites, thus the optimal content was identified. Si/BPC preserves a discharge specific capacity of 1021.6 mAh g−1 with a coulomb efficiency of 99.27% after 180 cycles at 1000 mA g−1, within the upgrade than single-doped and undoped. In rate test, it has a specific capacity of 1003.2 mAh g−1 at a high current density of 5000 mA g−1, quickly back towards 2838.6 mAh g−1 at 200 mA g−1. The inclusion of B and P elements is linked to the electrochemical characteristics. In the co-doped carbon layers, the synergistic impact of doping B and P accelerates the diffusion kinetics of lithium ions, boosts diffusion rate of Li+, offers low electrochemical impedance (45.75 Ω). This brings more defects to provide transport carriers and induces a substantial amount of electrochemically active sites, which fosters the storage of Li+, thus making silicon material electrochemically more active and potential.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.