Novel approach to single-screw compressors and expanders design**This manuscript has been authored by UT-Battelle, LLC, under contract DE-AC05-00OR22725 with the US Department of Energy (DOE). The US government retains and the publisher, by accepting the article for publication, acknowledges that the US government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript,

Abstract

Single-screw machines are currently employed as both compressors and expanders in vapor compression systems and organic Rankine cycles (ORCs), respectively. The working principle of single-screw machines is based on the simultaneous meshing of two starwheels with one central grooved rotor. The performance of the machine is heavily affected by the wear of the tooth meshing profile after several hours of running. In order to improve the wear resistance of the conventional straight-line profile, multi-column tooth flank designs have been introduced and investigated by several researchers. Cylindrical multi-column envelope profiles are able to distribute the local contact over a larger surface area reducing the wear of the tooth flank profile. Nevertheless, the manufacturability of such profiles is directly linked to the accuracy and limitations of CNC machines.In this work, an attempt is made to overcome the aforementioned limitations. To push the boundaries of possible tooth and rotor profile designs, 3D printing is utilized as manufacturing technique. Such approach allows the investigation of more complex designs that improves the sealing lines during the meshing process.A detailed geometry model based on polygon intersections is utilized to calculate the sealing lines, groove volume curves, and surface areas of the different designs. As a result of this study, a novel rotor design has been manufactured.