Abstract
Abstract In this study, super-amphiphobic nano-silica nanoparticles (SA-NPs) were used to enhance the shale stabilization performance of water-based drilling fluids (WBDFs) by altering the surface wettability, preventing the capillary self-priming effect, and plugging the nano-micro pores of shale. The results of transmission electron microscopy, particle size distribution, and scanning electron microscopy characterization revealed that SA-NPs exhibited a nanoscale “coalesce” structure, which is composed of spherical particles joined together, and could form a nano-papillary structure on the shale surface. Due to the presence of nano-micro scale rough structures and ultra-low surface energy components, the shale treated by SA-NPS exhibited super-amphiphobic surface property in the contact angle test. Contact angles of water and hexadecane on the shale surface reached up to 154.13° and 151.34° after being treated with SA-NPs, respectively. Furthermore, the addition of 1% SA-NPs in WBDFs could reduce the linear swelling rate from 40.5 to 6.0%, increase the shale cuttings recovery percentages from 82.5 to 95.6%, increase the plugging rate of low permeability shale core from 81.25 to 94.00%, and raise the high-temperature and high-pressure uniaxial compressive strength from 3.45 to 4.87 MPa. Compared with the polyether amine and fumed nano-silica, the addition of SA-NPs produced the best performance. Based on the excellent shale stabilization performance of SA-NPs, a high-performance WBDF was developed and applied in Dagang Oilfield. During the drilling operation， no wellbore instability, sticking, and other complex situations occurred. The results indicate that SA-NPs could better address the issue of wellbore instability in shale formations and have a great application prospect in shale well drilling.
Highlights
The rapid growth of global oil and gas demand and the depletion of conventional oil and gas resources have driven the rapid exploration and exploitation of unconventional oil and gas resources, especially shale oil and gas resources [1]
The super-amphiphobic nano-silica nanoparticles (SA-NPs), a commercial product provided by Shida Bocheng Technology Co., Ltd (Beijing, China), were synthesized by fluorination modification of fumed SiO2 NPs
FLAPI was measured by an SD-6 mediumpressure filtration apparatus (Qingdao, China) at a fixed pressure difference of 0.69 MPa and room temperature, in which the FLAPI was recorded after 30 min since the beginning
Summary
The rapid growth of global oil and gas demand and the depletion of conventional oil and gas resources have driven the rapid exploration and exploitation of unconventional oil and gas resources, especially shale oil and gas resources [1]. Being unable to form complete hydrophobic surfaces, much less super-hydrophobic ones, these surfactants or hydrophobic polymers can only increase the hydrophobic degree of rocks, and cannot effectively prevent water intrusion Nanomaterials such as fumed silica (SiO2) nanoparticles (NPs), titanium dioxide (TiO2) NPs, graphene oxide, and multi-walled carbon nanotubes (MCNTs) have shown great potential in improving the wellbore stability of shale formations [27–30]. Because they can plug the nano-micro pores on the shale surface, they can avoid free water intrusion. With SA-NPs as the core treatment agent, a high-performance WBDF was prepared, evaluated, and applied on the oilfield
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
