Novel adsorbent from agricultural waste (cashew NUT shell) for methylene blue dye removal: Optimization by response surface methodology

Abstract

Activated carbon, prepared from an agricultural waste, cashew nut shell (CNS) was utilized as an adsorbent for the removal of methylene blue (MB) dye from aqueous solution. Batch adsorption study was carried out with variables like pH, adsorbent dose, initial dye concentration and time. The response surface methodology (RSM) was applied to design the experiments, model the process and optimize the variable. A 24 full factorial central composite design was successfully employed for experimental design and analysis of the results. The parameters pH, adsorbent dose, initial dye concentration, and time considered for this investigation play an important role in the adsorption studies of methylene blue dye removal. The experimental values were in good agreement with the model predicted values. The optimum values of pH, adsorbent dose, initial dye concentration and time are found to be 10, 2.1846g/L, 50mg/L and 63min for complete removal of MB dye respectively.