Abstract
In order to solve the problems of poor dispersibility and wettability, as well as unsatisfactory wear resistance and load capacity of polytetrafluoroethylene (PTFE) as water lubricating additive, a new type of PTFE@silica (PTFE@SiO2) core-shell nanoparticles was prepared by encapsulating SiO2 layer on the surface of PTFE via chemical bonding. Electron microscope analysis showed that the synthesized particles had well-defined core-shell morphology. Special double/multi-core structure and a reduced thickness of the intermediate shell were found, and the formation mechanisms were also explored in detail. The water contact angle measurement proved that the wettability of PTFE could be greatly enhanced by coating SiO2 layer. The friction tests were performed to investigate the water lubrication properties of PTFE@SiO2 additive, the results indicated that the core-shell PTFE@SiO2 nanoparticles possessed the superior tribological properties, and the maximum friction coefficient and wear volume were respectively decreased by 75% and 99% when compared with pure water and water with PTFE/SiO2. Based on the analysis of worn surface, it was believed that the existence of core-shell structure and the formation of robust transfer film were the key to its excellent performance, and a possible lubrication mechanism was also proposed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
