Abstract

Nano-polycrystalline diamonds (NPDs) consist of nanosized diamond grains oriented in random directions. They have high toughness and isotropic mechanical properties. A NPD has neither the cleavage feature nor the anisotropy of hardness peculiar to single-crystal diamonds. Therefore, it is thought to be useful as a diamond anvil. We previously reported the usefulness of a NPD as an anvil for high-pressure development. In this study, some additional high-pressure generating tests using diamond anvils of various shapes prepared from NPDs were conducted to investigate the advantage of using NPDs for anvil applications. The results revealed that the achievable pressure value of a NPD anvil with a culet size of more than 300 μm is about 1.5 to 2 times higher than that of single-crystal diamond anvils, indicating that NPD anvils have considerable potential for large-volume diamond anvils with large culet sizes.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.