Abstract
In this paper, a nonvolatile resistance random access memory (RRAM) device based on ZnO nanorod arrays has been fabricated and characterized. Vertically aligned ZnO nanorod layers (NRLs) were deposited on indium tin oxide (ITO) electrodes using a hydrothermal process/ chemical bath deposition (CBD). It can be found the Ag/ZnO NRL/ITO capacitor exhibits bipolar resistive switching behavior. The resistive switching behavior may be related to the oxygen vacancies and/or zinc interstitials confined on the surface of the ZnO NRs, giving rise to the formation of straight and extensible conducting path along each ZnO NR. Furthermore, superior stability in resistive switching characteristics was also observed. Both growing times and annealing times were investigated and annealing was done in oxygen for 3, 6 and 9 minutes at different temperatures. For ZnO nanorods that had been annealed for 6 minutes the forming voltage was about 6.06V, the Set voltage was about 3.25V and the Reset voltage was -2.78V. The original resistance was 7×10 6 Ω. The resistance in the low-resistance state was 108Ω and in the high-resistance state was 2016Ω, the resistance ratio was 18.7.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
