Nonlinear mechanical behaviour and visco-hyperelastic constitutive description of isotropic-genesis, polydomain liquid crystal elastomers at high strain rates

Abstract

The mechanical behaviour of isotropic-genesis, polydomain liquid crystal elastomers (I-PLCEs) at various strain rates is systematically investigated via experiments, theoretical analysis, and numerical modelling. Experiments encompassing SEM (scanning electron microscope), DSC (differential scanning calorimetry), TGA (thermogravimetric analyser), quasi-static and dynamic (SHPB – split Hopkinson pressure bar) mechanical tests, as well as drop-weight impact tests, are undertaken to identify the nonlinear, large-strain, rate-dependent relationship between compressive stress and deformation of the I-PLCEs studied. Subsequently, a three-dimensional compressible visco-hyperelastic constitutive model for the material is established based on the summation of Cauchy stress components. The as-used model yields good agreement with experimental data, particularly an excellent description of the mechanical responses at high strain rates of 103∼104 s−1. The fully-calibrated constitutive model is implemented in the commercial finite element code ABAQUS via a virtual user-defined material (VUMAT) subroutine. The inhomogeneous deformation processes of the I-PLCEs, corresponding to impact by a hemispherically-tipped drop weight, which induces complex stress states, are also well described. Finally, when evaluated by two dimensionless physical parameters, the I-PLCEs demonstrate a more pronounced strain rate sensitivity in terms of dynamic strength and impact toughness compared to other commonly used materials, highlighting their superior performance in dynamic loading scenarios. The present study is helpful for the design and development of impact-resistant LCE-based materials and structures.