Nonlinear error full-field compensation method for phase measuring profilometry.

Abstract

Phase measuring profilometry (PMP) has the highest measuring accuracy among structured light projection-based three-dimensional (3D) sensing methods. Due to their low-cost and high-resolution features, commercial projectors are extensively used in PMP, but they are all designed with a gamma effect purpose that considers the characteristics of human vision. Affected by the gamma effect, a set of phase-shifting sinusoidal deformed patterns captured in PMP may contain high-order harmonics which lead to nonlinear phase errors. Then, a novel nonlinear error full-field compensation method is proposed. First, the unwrapped phases modulated by the reference plane are measured several times, and their average phase is taken as the measured phase modulated by the reference plane to eliminate random errors as much as possible. Second, an expected phase plane is fitted from this average phase with the least-squares method. Third, the nonlinear phase error can be detected by subtracting the fitted expected phase from this average phase. Finally, the full-field look-up table (LUT) can be established between the nonlinear phase error and the measured phase. When an object is measured, the unwrapped phase modulated by the object is taken as the measured phase of the LUT, so the corresponding nonlinear phase error can be directly searched in the LUT. In this way, the full-field nonlinear phase error can be efficiently compensated. Experimental results show the feasibility and validity of the proposed method. The mean absolute error (MAE) can be improved from 0.48mm to 0.06mm, and the root mean square error (RMSE) can be improved from 0.55mm to 0.07mm.