Abstract
The fatigue cracks may develop in the pipe systems due to long-term cyclic loading, which may cause catastrophic accidents. The finite element method (FEM) is usually adopted to simulate the stress singularity and breathing effect, resulting in expensive computational costs. Therefore, in this paper, an efficient hybrid semi-analytical and finite element (SA-FE) method is proposed to study the nonlinear dynamic characteristics of the fluid-transporting cracked pipe (FTCP) considering the breathing effect. Furthermore, the crack sensitivity parameters are obtained through bending-bending and bending-axial vibration analysis. For the SA-FE method, the semi-analytical method (SAM) and FEM are separately used to construct the dynamic models of the non-cracked and cracked regions, and the connection at the interface is performed by constraint equations. Subsequently, the validity of the modeling method is substantiated through both FEM and experimental tests. Finally, the effects of crack and fluid parameters on the dynamic characteristics of the FTCP are analyzed. The results indicate that changes in crack positions may trigger different-order mode switching, and continuous switching may occur between higher-order modes. In addition, the bending-bending and bending-axial coupling responses can effectively detect crack failures of the FTCP with varying levels of damage. The proposed model can offer valuable insights for fault diagnosis and health monitoring of FTCP.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.