Abstract

Railway tracks experience has shown that considering the effects of Soil-Structure Interaction (SSI) especially for soft soil sites is necessary. These effects can also be important for monorail bridges on soft soil beds. The main aim of this study is to investigate the effects of Soil-Pile-Bridge-Train Interaction (SPBTI) on the Qom Monorail Bridge (QMB) responses. In spite of many studies on the effects of monorail train-bridge (fixed-base structure) interaction, very little information is available in the literature on the effects of monorail trains on SPB systems. In this paper, an advanced three-dimensional (3D) continuum finite element analysis of QMB subjected to train moving loads was developed. The SPBT models have been validated using three case studies (two bridge-monorail train studies and a soil-pile-structure study) available in the literature. The maximum displacements of the guideway beam at the different train speeds were obtained for various SPBT system conditions. The effects of the stiffness and thickness of the soil, the bridge span length, and the amplitude, length, and geometry of the train loading on the critical speed of the SPBT system are discussed in detail. Finally, the results have been synthesized into simple design charts to select the appropriate straddle-type monorail train and determine its critical speed for a particular soil-bridge condition. In addition, a new simple method for simulating the behavior of the finger-bands (as one of the excitation source of vertical bridge vibrations) in commercial software was presented. The results show that the position of a monorail train bogies plays an important role in determining critical speed so that with uniformity the spacing between the bogies decreases the critical speed in the vertical direction.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call