Abstract

In this paper, a nonlinear supported Euler–Bernoulli beam under harmonic excitation coupled to a 2 degree of freedom vehicle model with cubic nonlinear stiffness and damping is investigated. The equations of motion are derived by Newton’s law and discretized into a set of coupled second-order nonlinear differential equations via Galerkin’s method with cubic nonlinear terms. Based on the created model, numerical simulations have been conducted using the Runge–Kutta integration method to perform a parametric study on influences of the nonlinear support stiffness coefficient, mass ratio, excitation amplitude and position relation for the vehicle–bridge interaction (VBI) system by using bifurcation diagram and 3-D frequency spectrum. The results indicate that depending on different parameters, a diverse range of periodic motion, quasi-periodic response, chaotic behavior and jump discontinuous phenomenon are observed. And the chaotic regions are scattered between a number of periodic/quasi-periodic motions. The study may contribute to a further understanding of the dynamic characteristics and present useful information to dynamic design and vibration control for the VBI system.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call