Nonlinear Aeroelasticity of a Very Flexible Blended-Wing-Body Aircraft

Abstract

Blended-wing-body (BWB) aircraft with high-aspect-ratio wings is an important configuration for high-altitude long-endurance unmanned aerial vehicles (HALE UAV). Recently, Northrop Grumann created a wind tunnel model under the Air Force’s High Lift over Drag Active (HiLDA) Wing program to study the aeroelastic characteristics of blended-wing-body for a potential Sensorcraft concept. This paper presents a study on the coupled aeroelastic / flight dynamics stability and response of a BWB aircraft that is modified from the HiLDA experimental model. An effective method is used to model very flexible BWB vehicles based on a low-order aeroelastic formulation that is capable of capturing the important structural nonlinear effects and couplings with the flight dynamics degrees of freedom. A nonlinear strain-based beam finite element formulation is used. Finite-state unsteady subsonic aerodynamic loads are incorporated to be coupled with all lifting surfaces, including the flexible body. Based on the proposed model, body-freedom flutter is studied, and is compared with the flutter results with all or partial rigid-body degrees of freedom constrained. The applicability of wind tunnel aeroelastic results (where the rigid-body motion is limited) is discussed in view of the free flight conditions (with all 6 rigid-body degrees of freedom). Furthermore, effects of structural and aerodynamic nonlinearities as well as wing bending/torsion rigidity coupling on the stability and gust response are also studied in this paper.