Abstract
In this paper, a nonisolated dc-dc converter with high voltage gain, soft-switching and PWM regulation is proposed. Dickson switched-capacitor (SC) structure is employed to extend the voltage conversion ratio and make the voltage stresses of all the switches and diodes far lower than the output voltage. At the input side of the topology, two boost circuits under interleaving operation can provide small input current ripple and reduce the current stresses of the main switches. The resonant inductors with small inductance are inserted in SC circuits to avoid the high current spikes existing in the conventional SC converters. All the switches can achieve zero voltage switching (ZVS) turn ON. Some of diodes can achieve zero current switching (ZCS) turn OFF, and the reverse recovery problems of the other diodes are alleviated. The operating principle, the voltage gain and soft-switching conditions are analyzed. Finally, a prototype converter with 25–40 V input and 400-V/1-kW output was established to verify the theoretical analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.