Nonisolated High Step-Up DC–DC Converters Adopting Switched-Capacitor Cell

Abstract

In a photovoltaic (PV)- or fuel-cell-based grid-connected power system, a high step-up dc-dc converter is required to boost the low voltage of a PV or fuel cell to a relatively high bus voltage for the downstream dc-ac grid-connected inverter. To integrate the advantages of the high voltage gain of a switched-capacitor (SC) converter and excellent output regulation of a switching-mode dc-dc converter, a method of combining the two types of converters is proposed in this paper. The basic idea is that when the switch is turned on, the inductor is charged, and the capacitors are connected in series to supply the load, and when the switch is turned off, the inductor releases energy to charge multiple capacitors in parallel, whose voltages are controlled by a pulsewidth modulation technique. Thus, a high voltage gain of the dc-dc converter can be obtained with good regulation. Based on this principle, a series of new topologies are derived, and the operating principles and voltage gains of the proposed converters are analyzed. Finally, the design of the proposed converter is given, and the experiment results are provided to verify the theoretical analysis.