Nonequilibrium nanoblend membranes for the pervaporation of benzene/cyclohexane mixtures

Abstract

AbstractImmiscible blends of polymers were cast from solution, and the rate of evaporation was controlled relative to the rate of phase separation to produce different morphologies; upon crosslinking, stable nonequilibrium nanoblends were realized. This process of forced assembly produced useful membrane materials that could be designed for solubility selectivity with the group contribution methodology. Crosslinked ternary blends of nitrile butadiene rubber (NBR), poly(methyl methacrylate) (PMMA), and a tercopolymer of ethylene oxide/epichlorohydrin/allyl glycidyl ether (Hydrin) were examined for use in the separation of benzene from cyclohexane by pervaporation. For a 50 : 50 wt % benzene/cyclohexane feed, blend 811 (containing 80 wt % NBR, 10 wt % Hydrin, and 10 wt % PMMA) gave a separation factor of 7.3 and a normalized flux of 28 kg μm/m2 h; such a performance is unmatched in the literature, with the flux being very high for the reported separation factor. Among the samples tested, the flux of the membrane increased as the amount of NBR in the ternary blend decreased; however, the separation factor was not largely affected. Blended samples showed no sign of deformation after 48 h at the operating temperature as compared to pure NBR, which did show evidence of creep. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008