Nondestructive observation of the surrounding powder in the vicinity of polymer laser-sintered specimens for understanding orange peel formation

Abstract

PurposeOrange peel formation remains to be understood clearly because it is difficult to directly observe a laser-sintered process in a partcake. Therefore, this study aims to provide insight into the orange peel formation mechanism through the nondestructive observation of laser-sintered specimens and their surrounding powders.Design/methodology/approachThis study observed polyamide 12 powder in the vicinity of a laser-sintered specimen via X-ray computed tomography (CT) scanning. The specimen for nondestructive observation was 3D modeled in a hollow box using 3D CAD software. The boxes built using a laser-sintering system contained unsintered surrounding powder and sintered specimens. The box contents were preserved even after the boxes were removed from the partcake. After X-ray CT scanning, the authors broke the boxes and evaluated the unevenness formed on the specimen surface (i.e. the orange peel evaluation).FindingsVoids (not those in sintered parts) generated in the powder in the vicinity of the specimen triggered the orange peel formation. Voids were less likely to form in the build with a 178.5° powder bed than in the build with a 173.5° powder bed. Similarly, the increment in laser energy density effectively suppressed void formation, although there was a tradeoff with overmelting. Thin-walled parts avoided void growth and made the orange peel less noticeable.Originality/valueTo the best of the authors’ knowledge, this study is the first to observe and understand the relationship between voids generated in the powder in the vicinity of sintered parts and orange peel formation.