Abstract
ABSTRACT The computer tomography(CT image of wood was analyzed to estimate the moisture content from CT number. Comparing moisture contents, densities and CT numbers, moisture distributions were nondestructively determined by CT numbers detected with the scanner. By periodically measuring CT images of the same cross section of specimens in drying, change of moisture distribution was computed. The coefficients of moisture movement at given positions inside the specimen were directly calculated from Fick's Law with known values of moisture content change, distance and drying time. The diffiion coeficient was described as a function of various driving forces of moisture content, partial vapor pressure and chemical potential of moisture in wood. The results were comparable to data in the literature. Furthermore, it is shown that diffusion coefficients based on moisture content varies as a curve with the maximum value at about 15% m.c. during drying, and that the moisture content is actually adaptable to the driving force for moisture movement in wood because of capability over wide moisture content range.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.