Abstract
In the work experimental results on the manufacture of glass foam with high mechanical strength from glass waste are presented. By replacing the usual conventional energy source with a nonconventional energy (electromagnetic waves) the heating efficiency allows a fast and economical manufacturing process. Calcium carbonate as a foaming agent and an addition of sodium silicate (aqueous solution) as a binder were used. By their physico-mechanical and morphological features (0.40-0.66 g/ cm<sup>3 </sup>the apparent density, 0.054-0113 W/ m·K the thermal conductivity, 2.2-6.3 MPa the compressive strength, below 1.2 % the water absorption and under 2 mm the pore size), the foams are appropriate for their use as replacer of existing similar building materials on the market.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.