Abstract
Low-earth-orbit (LEO) synthetic aperture radar (SAR) can achieve advanced remote sensing applications benefiting from the large beam coverage and long duration time of interested area provided by a geosynchronous (GEO) SAR illuminator. In addition, the receiving LEO SAR system is also cost-effective because the transmitting module can be omitted. In this article, an imaging method for GEO-LEO bistatic SAR (BiSAR) is proposed. First, the propagation delay characteristics of GEO-LEO BiSAR are studied. It is found that the traditional “stop-and-go” propagation delay assumption is not appropriate due to the long transmitting path and high speed of the LEO SAR receiver. Then, an improved propagation delay model and the corresponding range model for GEO-LEO BiSAR are established to lay the foundation of accurate imaging. After analyzing the sampling characteristics of GEO-LEO BiSAR, it is found that only 12.5% sampling data can be acquired in the azimuth direction. To handle the serious sub-Nyquist sampling problem and achieve good focusing results, an imaging method combined with multireceiving technique and compressed sensing is proposed. The multireceiving observation model is first obtained based on the inverse process of a nonlinear chirp-scaling imaging method, which can handle 2-D space-variant echo. Following that, the imaging problem of GEO-LEO BiSAR is converted to an $L_{1}$ regularization problem. Finally, an effective recovery method named complex approximate message passing (CAMP) is applied to obtain the final nonambiguous image. Simulation results show that the proposed method can suppress eight times Doppler ambiguity and obtain the well-focused image with three receiving channels. With the proposed method, the number of required receiving channels can be greatly reduced.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Geoscience and Remote Sensing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.