Non-alloyed ohmic contacts to (010) β -Ga2O3 with low contact resistance

Abstract

Low resistance non-alloyed ohmic contacts are realized by a metal-first process on homoepitaxial, heavily n+ doped (010) β-Ga2O3. The resulting contacts have a contact resistance (Rc) as low as 0.23 Ω-mm on an as-grown sample and exhibit nearly linear ohmic behavior even without a post-metallization anneal. The metal-first process was applied to form non-alloyed contacts on n+ (010) β-Ga2O3 grown by metal-organic chemical vapor deposition (MOCVD) as well as suboxide molecular beam epitaxy. Identical contacts fabricated on similar MOCVD samples by conventional liftoff processing exhibit highly rectifying Schottky behavior. Re-processing using the metal-first process after removal of the poor contacts by conventional methods does not improve the contacts; however, addition of a Ga-flux polishing step followed by re-processing using a metal-first process again results in low resistance, nearly linear ohmic contacts. The liftoff process, therefore, does not reliably render nearly linear ohmic behavior in non-alloyed contacts. Furthermore, no interface contamination was detected by x-ray photoelectron spectroscopy. This suggests that during the initial liftoff processing, a detrimental layer may form at the interface, likely modification of the Ga2O3 surface, that is not removable during the contact removal process but that can be removed by Ga-flux polishing.