Abstract
A cold-sintering process at a very low temperature (300 °C) achieved stable immobilization of simulated radioiodine waste incorporated in sodalite (iodosodalite). The reported sintering temperature was much lower than conventional ceramic waste form processing temperatures (600−1100 °C) and had no effect on the stability of the loaded iodine waste. Excellent iodine retention (>93%) with relative sintered density 91% were achieved by the cold-sintering at 300 °C, respectively. The sintered body exhibited a micro-hardness value of 3.9 ± 0.1 GPa and compressive strength of 198 ± 11 MPa. The seven-day product consistency test found iodine leaching rates on order of the magnitude 10-4 g/m2⋅d. These results are the first example of the low temperature consolidation of iodine-bearing sodalite without using any additional material (e.g. glass, cement, etc.). High retention of the loaded simulated radioiodine without volatilization warrants the cold-sintering process for the environmental-friendly disposal of radioiodine.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
