Abstract
This brief reports on the RF design and practical development of a non-reciprocal balanced bandpass filter (BPF) that exhibits a highly-selective quasi-elliptic response in the forward direction of propagation that is shaped by four transmission poles and two transmission zeros (TZs). By modulating some of the filter’s resonators with phase-progressed AC signals, a non-reciprocal response is obtained in the differential mode. Its common-mode is also highly suppressed due to the incorporation of a balanced network that results in two additional TZs and resistive loss that are unique to the common-mode. The filter order can be increased by cascading additional resonators. For validation purposes, a microstrip prototype centered at 725 MHz was designed, manufactured, and measured. It showed a high isolation in the differential-mode reverse transmission of up to 62.1 dB. Moreover, the common-mode was suppressed by over 45 dB in a bandwidth greater than one octave.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Circuits and Systems II: Express Briefs
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.