Abstract
Non-isothermal crystallization of aqueous nanofluids in the presence of two types of high aspect-ratio carbon nano-additives, i.e., carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs), was characterized by means of differential scanning calorimetry (DSC). A parametric investigation was performed on various concentrations of the nanofluids as well as various cooling rates during the DSC tests. In addition to the supercooling degree and latent heat of crystallization, the crystallization kinetics was also analyzed by both the Ozawa method and a modified Ozawa-based method. It was shown that dilute loading of CNTs or GNPs leads to reduction of the supercooling degree up to 5°C due to the nucleating effect. The planarly-shaped GNPs featuring large contact area perform better than CNTs in facilitating heterogeneous nucleation, which greatly suppress crystal growth during the late phase of non-isothermal crystallization. In contrast to the case of GNPs, CNTs may be able to accelerate crystallization up to nearly 37% at relatively dilute loadings, especially when the cooling rate is low. The CNT-based aqueous nanofluids exhibit more balanced performance in supercooling degree, latent heat of crystallization, and crystallization kinetics, which may be utilized as an emerging candidate of phase change materials for cold thermal energy storage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.