Abstract
The nuclear and non-nuclear industry has produced a considerable amount of low and intermediate-level radioactive wastes during the last decades. The material characterization of waste packages recently became more and more important in order to dispose of these waste packages in a final underground repository. Material characterization remains an indispensable criterion to prevent pollution of the groundwater with toxic materials and is usually required by the national licensing and supervisory authorities. Information on the nature of waste materials can be obtained based on existing documentation or, if the documentation is insufficient, on further destructive or non-destructive analysis. Non-destructive methods are to be preferred to minimize radiation exposures of operating personnel as well as costs. Existing non-destructive techniques (Gamma scanning, X-ray, active/passive neutron counting, muon tomography) do not allow the identification of non-radioactive hazardous substances. An innovative non-destructive measurement system called QUANTOM® (QUantitative ANalysis of TOxic and non-toxic Materials) has been developed. It is based on the prompt and delayed gamma neutron activation analysis (P&DGNAA). This technology is able to identify and quantify the elemental composition (Cd, Cu, B, Pb, Hg, Fe, Al, …) in radioactive packages such as 200-l radioactive drums. This information helps waste producers verify the content of their radioactive wastes, especially regarding the presence of hazardous substances. Different reference materials have been analysed by means of the same technology (P&DGNAA) at the research reactor of BUDAPEST. A comparison of those results for five reference materials is presented. The results show a very good agreement between QUANTOM® and standardized reference analyses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.