Non-destructive Inspection System Development for Secondary Battery Welding Part

Abstract

In this paper, we develop a non-destructive inspection system for secondary battery welding. In a secondary battery, when the insulation or separator of each electrode is damaged by an impact from the outside depending on the degree of welding, an internal short circuit occurs during charging and fires even if it does not ignite at that time. To detect this, a non-destructive AOI (Automatic Optical Inspection) system is developed that compares the inspection target with the reference image to determine whether there is a proper indentation in the welding part. The system consists of a precision alignment stage on the lower part and imaging equipment that performs AOI, a non-destructive inspection on the upper part. And the appropriate exposure, i.e., the aperture setting of the used camera, was confirmed through the experiment according to the position of the pole .