Abstract
ABSTRACT This study investigates the effect of stress amplitude on the damage sensing characteristic of glass fibre reinforced (GFRP) composites under fatigue loading using the electrical resistance change (ERC) method. The electrical conductivity of GFRP composites was achieved by incorporating 0.3 wt.% multi-walled carbon nanotubes (MWCNTs) into epoxy resin by ultrasonication method. In-situ electrical resistance measurements during fatigue tests of MWCNT-filled GFRP (MWNCT/GFRP) composites were conducted at two different stress amplitudes, S = 0.6 and S = 0.5. The average stiffness losses at failure were observed as 28% and 25% for S = 0.6 and S = 0.5 respectively. The corresponding ERC ratios at failure were found as 153% and 59% for S = 0.6 and S = 0.5, respectively. A two-parameter Weibull analysis, based on the ERC ratios corresponding to 40%, 60%, 80%, and 100% (failure) fatigue life, was implemented to establish reliability curves at the two stress amplitudes. The ERC ratios at failure with a 95% reliability for S = 0.6 and S = 0.5 were determined as 64% and 23%, respectively. Finally, the remaining fatigue life and the stiffness loss of composite specimens at the ERC ratios corresponding to various Weibull reliability were found for both stress amplitudes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.