Abstract
Post-production precision cleaning is one critical challenge in Additive Manufacturing (AM) production of high-value, critical parts/builds. A part shedding particle during its operational use could cause severe complications in critical applications such as medical devices and aerospace components. This study presents a non-contact precision particle removal procedure based on a novel Dry Laser Cleaning (DLC) framework. DLC utilizes the thermo-elastic wave generation/propagation and high-frequency surface acceleration fields to dislodge and remove remnant particles due to inertial forces from a well-defined (user-specified) cleaning zone in a non-contact manner, as opposed to cleaning the entire build surface, which could lead to undesirable re-deposition and re-location of particles as well as high cost. The removal of spherical Stainless Steel 316 L (SS316L) micro-particles commonly used in AM from polished, atomically flat Silicon (Si) wafer substrates with uniform high free surface energy using a nano-second laser pulse is experimentally and computationally investigated. In general, a rough surface has a lower average free surface energy; thus, its cleaning, compared to Si wafer, is less challenging. The data with the SS316-Si material pair offers a consistent baseline. In parallel to experiments, a fully-coupled thermo-mechanical finite element study is also conducted for transient surface acceleration simulations to predict the effectiveness of SS316L micro-particle removal from a Si wafer substrate with laser pulsation. It is observed that SS316L micro-particles with a diameter larger than 5.61 μm, 8.43 μm, and 12.24 μm can be removed entirely at 3 mm, 6 mm, and 9 mm distances from its epicenter, respectively. Accordingly, a work-of-adhesion of 990.8 mJ/m2 is selected between the SS316-Si material pair, consistent with the literature. The reported experiments and simulations demonstrate the potential of the proposed rapid precision particle removal procedure for cleaning critical powder-based AM builds, where the targeted removal of particles is essential for the safe and reliable operation of high-value builds and parts.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
