Abstract
As a health monitoring tool of bolts in infrastructures, we propose a non-contact evaluation method for the axial force of a bolt. Deformation of the bolt head is measured as an electrical capacitance variation detected as a frequency shift of a simple circuit composed of a quartz crystal resonator and coils. The measurement was carried out via magnetic field coupling between the coil installed on the bolt head and another coil connected to the measurement instrument. Since the method requires no active electronic circuit or battery for the bolt, low cost and high durability can be expected. First, the circuit was analyzed and optimized using an equivalent circuit model. Then, the feasibility of the proposed method was experimentally studied using a prototype. It was demonstrated that the method enabled non-contact axial force estimation in which the dependence on the distance between the coils is sufficiently small for detecting bolt looseness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.