Non-collinear generation of ultra-broadband parametric fluorescence photon pairs using chirped quasi-phase matching slab waveguides.

Abstract

Many optical quantum applications rely on broadband frequency correlated photon pair sources. We previously reported a scheme for collinear emission of high-efficiency and ultra-broadband photon pairs using chirped quasi-phase matching (QPM) periodically poled stoichiometric lithium tantalate (PPSLT) ridge waveguides. However, collinearly emitted photon pairs cannot be directly adopted for applications that are based on two-photon interference, such as quantum optical coherence tomography (QOCT). In this work, we developed a chirped QPM device with a slab waveguide structure. This device was designed to produce spatially separable (photon pair non-collinear emission) parametric fluorescence photon pairs with an ultra-broadband bandwidth in an extremely efficient manner. Using a non-chirped QPM slab waveguide, we observed a photon pair spectrum with a full-width-at-half-maximum (FWHM) bandwidth of 26 nm. When using a 3% chirped QPM slab waveguide, the FWHM bandwidth of the spectrum increased to 190 nm, and the base-to-base width is 308 nm. We also confirmed a generation efficiency of 2.4×106 pairs/(μW·s) using the non-chirped device, and a efficiency of 8×105 pairs/(μW·s) using the 3% chirped device under non-collinear emission conditions after single-mode fiber coupling. This is, to the best of our knowledge, the first report of frequency correlated photon pairs generation using slab waveguide device as a source. In addition, using slab waveguides as photon pair sources, we performed two-photon interference experiments with the non-chirped device and obtained a Hong-Ou-Mandel (HOM) dip with a FWHM of 7.7 μm and visibility of 98%. When using the 3% chirped device as photon pair source, the HOM measurement gave a 2 μm FWHM dip and 74% visibility.