Abstract
Variations in operative non-basal slip systems in Ni3Ti-based long-period stacking ordered (LPSO) phases with the stacking sequence of the closely packed planes and the temperature dependence of the critical resolved shear stress (CRSS) were investigated. It was confirmed that the {1¯100} prism slip is operative in most of the LPSO phases with hexagonal unit cells, while the {1¯011} pyramidal slip is operative in 9R LPSO phase with rhombohedral unit cell. The mechanism controlling the deformation by non-basal slip at low temperatures is considered to be governed by the energy of the antiphase boundary (APB) formed between the a/6〈112¯0〉 superpartial dislocations in accordance with the kink pair nucleation mechanism proposed by Mitchell et al. The dependence of variations in CRSS for non-basal slip on the Nb content was found to be much smaller than that for basal slip. The present results suggest that the mobility of dislocations on the non-basal plane hardly affected the behavior of yield stress anomalies (YSAs) caused by basal slip in Ni-based LPSO phases, although the Kear–Wilsdorf locking process, which is responsible for the YSA by basal slip, accompanies microscopic cross-slip from the basal slip plane onto the non-basal planes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.