Abstract
This paper discussed a noise reduction effect of airfoil and small-scale model rotor by using attached serration trailing edge in the wind tunnel test condition. In order to analyze the changes in the performance due to the inclusion of a serrated trailing edge designed to reduce noise, a 10 kW wind turbine rotor was equipped with a thin serrated trailing edge. The restrictive condition for the serrated trailing edge equipped with the using of a 2D airfoil was examined through the using of a wind tunnel experiment after studying existing restrictive condition and analyzing prior research on serrated trailing edges. The aerodynamic performance and noise reduction effect of a small-scale model were investigated with the using of a serrated trailing edge. Moreover, the noise levels from the experiment were considered that the noise prediction method could be used for a full-scale rotor. It is confirmed that noise reduction effect is compared with wind tunnel test data at the 2D airfoil and model rotor condition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.