NMR Study of LiCo0.96Al0.04O2 As a Positive Electrode Material for Li-Ion Batteries: Homogeneity and Role of Doping on Mechanisms

Abstract

LiCoO2 (LCO) is one of the most widely used positive electrode materials in lithium-ion batteries due to its high volumetric energy density which can be further improved by charging at high voltages. However, working at high potential (above 4.3 V vs. Li+/Li) causes a deterioration in cycling performance induced by structural instabilities, electrolyte oxidation and Co dissolution. Extensive studies have been devoted to increasing energy density by increasing the cutoff voltage. The substitution of cobalt with various metals is one of the classic methods, the choice of aluminum as dopant for example is based on several criteria: low cost and non-toxicity, a similar radius for Al3+ compared to Co3+ (0.535 Å vs. 0.545 Å) facilitates the replacement of the latter and maintains the structure leading to the complete solid solution LiCo1-yAlyO2.We will focus here on LiCo0.96Al0.04O2, synthesized by the solid route and characterized by 7Li, 27Al and 59Co Nuclear Magnetic Resonance (NMR) and synchrotron X-Ray Diffraction (XRD). In addition to the characterization of the mean structure by XRD, the NMR allows us to study the local environments of the different nuclei. 27Al MAS NMR and synchrotron XRD studies revealed that the Al-doping in this material is homogeneous. 7Li MAS NMR indicates that its stoichiometry (Li/M=1.00) is ideal. The electrochemical study has shown that the phase transitions occurring during delithiation of LiCoO2, were partially eliminated by aluminum doping even with a low doping amount and the high potential mechanisms appear to be different. In order to better understand the role of Al-doping on the mechanisms involved during cycling, several phases LixCo0.96Al0.04O2 were prepared by electrochemical deintercalation and studied by 7Li, 59Co, and 27Al NMR and by XRD.During lithium deintercalation, Co3+ is oxidized to Co4+ then one unpaired electron is generated in the t2g band of Co atoms (t2g 5eg 0). For 0.8 ≤ x ˂ 1.00 the 7Li MAS NMR shows that the system behaves locally as two phase domain: domain with localized electrons and domain with delocalized ones on Con+ ions (Knight shift), even for very low amount of deintercalation (x=0.98), thus the XRD results confirm the existence of the biphasic domain. Whereas, a single phase domain is observed for the deintercalated materials with 0.4 ≤ x ≤ 0.8 and also at the NMR time of scale a single signal (Knight shift) is observed. This signal increases in intensity at the expense of 0 ppm and shifts to the higher isotropic displacement values up to x=0.5 then decreases, thus the evolution of the chex lattice parameter is correlated with the signal shift. For x = 0.3 and x = 0.2: a new broad signal appears probably due to formation of new Li environment in stacking faulted layers (O1 type). These different contributions will be more detailed on the presentation.