Abstract

Using nuclear magnetic resonance (NMR) flow imaging to examine fluid motions at constant velocities or flows that change relatively slowly has been well-documented in the literature. Application of this technique to accelerative flows, on the other hand, has been limited. This study reports the use of an NMR flow imaging method, for which acceleration is not explicitly compensated in the NMR pulse sequence, to measure axial and radial fluid motions during flow through an axisymmetric sudden contraction. In this flow geometry, both velocity and acceleration are spatially dependent. The flow contraction ratio was 2:1. The method was first applied to examine Newtonian liquids at low and high Reynolds numbers under laminar flow conditions. The measured axial and radial velocity profiles, without accounting for acceleration effects in the data analysis, across the contraction are in excellent qualitative agreement with previous experimental data and theoretical calculations reported in the literature. Quantitative comparison of the axial and radial velocities with numerical results indicates that the maximum error from acceleration effects is about 10%. The method has also been used to examine the flow of a concentrated suspension (50% by volume of solid particles) through the contraction. The flow kinematics of the suspension at creeping flow conditions appear to mimic those of the Newtonian fluid with some slight differences. NMR images taken immediately following the cessation of flow suggest a slight degree of particle migration toward the center of the pipe downstream of the contraction.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call