Abstract

捺染染色工場から排出される廃水には尿素由来の有機態窒素が高濃度で含まれており、その窒素除去が大きな課題となっている。我々はこれまでに不織布を固定化担体に用いた新しい窒素除去法を開発した。本研究では、固定化担体として不織布の代わりに、和歌山県の地場産品でもあるパイル織物を用いた固定化材を用いて、連続硝化・脱窒処理試験を行った。結果、アクリル製のパイル織物を汚泥付着用の固定化担体として用いた場合、単位面積あたりの硝化速度は、不織布を用いた場合の約3.4倍に達した。このアクリル製のパイル織物を用いて、連続硝化処理試験を行ったところ、流入窒素負荷が0.5 kg/m3/day、滞留時間10時間で、約75%の硝化率を達成した。さらに、目詰まりによる処理性能の低下を防ぐために、ベース部分が格子状になったパイル織物を固定化担体として用いた連続硝化・脱窒処理試験を行ったところ、流入窒素濃度200 mg/l、流入TOC濃度450 mg/lの条件下で、目詰まりによる処理性能の低下なしに、HRT = 12 hrで約56%、HRT = 19 hrで約77%の窒素除去率を達成した。

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.