Nitrogen diffusion along the layer boundaries after nitriding of multilayer materials

Abstract

Diffusion processes play a key role in formation of the structures of new materials and technological processes of strengthening heat treatments, since diffusion is the reason for redistribution of substances in solids. An urgent task is to develop technologically advanced and effective methods for strengthening materials in order to improve their performance properties. There is an increasing need to improve chemical heat treatment methods, which directly affects the wear resistance of working surfaces, and, consequently, the product service life. Near-surface volumes experience increased loads, so the formation of high-strength layers becomes an important task. Quite a few methods of surface hardening are known, among which carburization, nitriding, nitrocarburization and others are widely used. The most interesting is nitriding, since it increases hardness, strength, fatigue limit, and heat resistance. However, despite the proper advantages, nitriding has a number of disadvantages, including the holding duration and small thickness of diffusion layers. The solution is related to intensification of the technological process by increasing the nitriding temperature, activating the nitriding media or directly the parts surface. All these solutions are aimed at accelerating diffusion processes, both in grain volume and along grain boundaries, the velocity along which is many times higher than the velocity of volumetric diffusion. It may be effective to use a new type of structural metal materials with a multilayer structure of hundreds of layers, with thicknesses in the micron and submicron ranges separated by large angular boundaries. The results of metallographic studies showed the effect of the steel layers interchange in the multilayer metal material on diffusion depth after chemical heat treatment. The authors proposed an accelerate diffusion model of diffusible element along the layer boundaries.