Abstract

ABSTRACTThe drive to a more circular economy has created increasing interest in recycling organic wastes as bio-based fertilizers. This study screened 15 different manures, digestates, sludges, composts, industry by-products, and struvites. Nitrogen (N) and phosphorous (P) release was compared following addition to soil. Three waste materials were then ‘upgraded’ using heating and pressure (105°C at 220 kPa), alkalinization (pH 10), or sonification to modify N and P release properties, and compared in a second soil incubation. Generally, maximum N release was negatively correlated with the CN ratio of the material (r = −0.6). Composted, dried, or raw organic waste materials released less N (mean of 10.8 ± 0.5%, 45.3 ± 7.2%, and 47.4 ± 3.2% of total N added respectively) than digestates, industry-derived organic fertilizer products, and struvites (mean of 58.2 ± 2.8%, 77.7 ± 6.0%, and 100.0 ± 13.1% of total N added respectively). No analyzed chemical property or processing type could explain differences in P release. No single upgrading treatment consistently increased N or P release. However, for one raw biosolid, heating at a low temperature (105°C) with pressure did increase N release as a percentage of total N added to soil from 30% to 43%.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.