Abstract

Abstract GaN epitaxial layers and nitride-based light-emitting diodes (LEDs) structures with a conventional single low-temperature (LT) GaN buffer layer and multiple Mg x N y /GaN buffer layers were prepared by metalorganic chemical vapor deposition. It was found that crystal quality of the GaN epilayer prepared on multiple Mg x N y /GaN buffer layers was significantly better than that prepared with conventional low-temperature GaN nucleation layer. With the multiple Mg x N y /GaN buffer layers, it was also found that 20 mA LED output power can be enhanced by 12%, as compared to the conventional LED. Such an enhancement in output power could be attributed to the reduction of threading dislocation induced nonradiative recombination centers using 12-pairs Mg x N y /GaN buffer layers.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call