Abstract
The authors used a nitric acid (HNO3)-sodium dodecyl benzene sulfonate (SDBS) method to modify a lignite-based activated carbon. These modified carbons were appraised for their removal of Cd(II) from aqueous solutions. Response surface methodology was employed to optimize the preparation factors including nitric acid concentration CN, temperature T and SDBS concentration CS. Statistical analysis indicated that the interaction of CN and CS incurred the most effect on the maximum cadmium adsorption capacity (Qm). The optimal Qm appeared at CN = 3.29 mol/L, T = 76 °C and CS=30,700 mg/L. The optimal protocol achieved 44.21 mg/g Qm for Cd(II) which was about 7 times larger than for this pristine lignite activated carbon (LAC) (6.78 mg/g). The physical-chemical properties of the modified activated carbons following each synthesis step were characterized relative to their surface area, oxygen functionality, and external surface charge. It was confirmed that the developed surface area, functional groups and negative charges were mainly responsible for the higher adsorption capacity for the LAC that have been more favorably tailored by this HNO3-SDBS protocol.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Water science and technology : a journal of the International Association on Water Pollution Research
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.