Abstract
Semi‐permeable membranes of binary polymer blends of cellulose triacetate (CTA) and chitosan (CS) were produced to harvest microalgal biomass for biofuels. Relatively thick membranes of polymer blends containing more than 70% CTA were prepared via solution blending in formic acid. Various characterization methods revealed that both polymers are immiscible at the molecular level at room temperature. However, they were macroscopically compatible and exhibited uniform physical properties due to the molecular interactions between CTA and CS with the same cellulosic backbone containing two linear polysaccharides through a β‐1,4 glycosidic bond. Careful visual inspection revealed that these membranes are transparent and their light transmittance was greater than 90% at all blend compositions. All membranes showed excellent tensile strength at all compositions and the maximum tensile strength was 52.4 MP from the membrane with a CTA/CS weight ratio of 9:1. The permeability of these blend films increased with increasing CS content and the maximum value was 44.28 mg/m2/day. To improve the permeability or transfer rate of the CTA/CS membranes, the porous CTA/CS membranes were also prepared using various amounts of silica nanoparticles. POLYM. ENG. SCI., 58:192–197, 2018. © 2017 Society of Plastics Engineers
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
