Abstract
Anode substrate has a great effect on screen-printing fabrication of yttria-stabilized zirconia (YSZ) electrolyte film and cell performance. In this work, NiO+YSZ anode substrate was prepared by a conventional ceramic sintering method, on which dense YSZ electrolyte film was successfully fabricated by screen-printing method. Microstructure of the anode substrate and cell performance were investigated. The optimal amount of addition of starch to the anode substrate was 20 wt%. The optimal temperature for pre-sintering of NiO powder was 800 °C. A single cell with the NiO powder pre-sintered at 800 °C exhibited the highest power density of 0.95 W cm −2 at 700 °C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.