Abstract

In the present paper, we investigate the effects of alkali and operational temperature on NiO capacitive and optical properties. The NiO samples were prepared by a straightforward, surfactant-free hydrothermal synthesis, employing Ni(NO3)2 and either urea or moderately sterically hindered triethylamine (TEA). The syntheses were followed by calcinations at either 400 or 600 °C. NiO samples were characterized by XRD, scanning electron microscopy, and nitrogen adsorption isotherms. The optical properties were investigated by reflectance spectroscopy, and the pseudocapacitance was studied by cyclic voltammetry and galvanostatic charge charge-discharge measurements. We found that the synthesis with TEA yielded nanoflowers whereas the morphology of the synthesis with urea varied with the calcination temperature and resulted in nanoparticles or nanoslices at calcination temperatures of 400 and 600 °C, respectively. The NiO samples prepared at a lower temperature displayed a favorable combination of surface area and porosity that allowed for high performance with capacitances of 502 and 520 F g−1 at a current density of 1 A g−1 for nanoflowers and nanoparticles, respectively. The band gaps of all the samples were compatible with the estimated nanoparticle sizes. Finally, we used the synthesized NiO samples for the preparation of screen-printed electrodes (SPEs) modified by drop-casting and probed them against a [Fe(CN)6]3−/4− probe.

Highlights

  • Energy harvesting and energy storage are preeminent issues, as fossil fuels are being depleted and alternatives become a necessity more than an aleatory option

  • The NiO samples prepared at a lower temperature displayed a favorable combination of surface area and porosity that allowed for high performance with capacitances of 502 and 520 F g−1 at a current density of 1 A g−1 for nanoflowers and nanoparticles, respectively

  • When it comes to energy storage, Faradaic pseudocapacitors using oxidation-reduction reactions have the advantage over electrical double-layer capacitors (EDLC) of a higher capacitance, since the reactions occur both at the surface and near the surface of an active electrode [1]

Read more

Summary

Introduction

Energy harvesting and energy storage are preeminent issues, as fossil fuels are being depleted and alternatives become a necessity more than an aleatory option When it comes to energy storage, Faradaic pseudocapacitors using oxidation-reduction reactions have the advantage over electrical double-layer capacitors (EDLC) of a higher capacitance, since the reactions occur both at the surface and near the surface of an active electrode [1]. With geometrical capacitance as an electronically driven factor, the structure and morphology of the capacitor material is an issue In this regard, NiO fulfills many of the desired characteristics, since it is cheap and widely used as the material of pseudocapacitors and can be synthesized via several routes. They can be obtained in several shapes, arrangements, Materials 2020, 13, 1417; doi:10.3390/ma13061417 www.mdpi.com/journal/materials

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call