Abstract

A novel catalyst, Nickel supported over MCM-41 coated ceramic membrane (NMC), was developed using coating method and deposition-precipitation method and applied for steam reforming of real tar in fixed bed. The effects of reaction conditions such as Ni loading amount, reaction temperature and mass ratio of steam to tar were also studied. The good dispersion of Ni nanoparticles and the strong interaction between Ni particles and the support were identified by BET, XRD, H2-TPR and SEM/EDS, resulting in the excellent performance of NMC catalysts. Maximum tar conversion of 96.4% and H2 yield of 98.7 mmol g−1 were obtained using 20NMC with a mass ratio of steam to coal tar of 2 at 800 °C. Moreover, 20 NMC exhibited a good stability in 10 h of lifetime test and the resistance of graphitic carbon formation prone to easier regeneration of catalysts illustrated by Raman spectroscopy. It indicates that the utilization of NMC catalysts for tar steam reforming is a promising way.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.