Nickel nanocatalyst on lanthanum aluminate: Optimizing preparation and evaluating performance in glycerol dry reforming for syngas production

Abstract

In this study, mesoporous nanocrystalline Ni/La-Al catalysts with varying nickel (Ni) loadings (5, 10, 15, and 20 wt.%) were synthesized using a solid-state method for the glycerol dry reforming (GDR) reaction. The effects of different Ni loadings and the addition of steam on the structural and catalytic performance of the catalysts were investigated. Characterization techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), and X-ray diffraction (XRD) were employed to analyze the catalysts' properties. Results showed that increasing Ni loading to 10 wt.% improves the catalytic properties. However, by increasing the Ni loading, a decrease in catalytic properties due to increasing particle size, creating NiO bulk phase and surface pore blockage is obvious. A series of experiments were performed to investigate the effect of steam usage on catalytic properties. TPO analysis revealed that steam addition reduces the carbon deposition and shifts oxidation peaks to lower temperatures; consequently, the activity and stability of the catalyst will be enhanced. Although the 5 - 7.5 vol.% of steam in the feed composition significantly stabilizes the catalyst, it is possible to produce H2-rich synthesis gas, and conversely, increasing the temperature reduces the H2/CO ratio. Various examinations were conducted under different conditions, including varying gas hourly space velocity (GHSV), carbon-to-glycerol ratio (CGR), and temperature, to obtain more comprehensive data on the catalysts.