Abstract

Two nickel-containing zincosilicates (Ni-CIT-6 and Ni–Zn-MCM-41) and two nickel-containing aluminosilicates (Ni-HiAl-BEA and Ni-USY) are synthesized and used as catalysts to oligomerize propylene into C3n (C6 and C9) products. Both Ni-CIT-6 and Ni-HiAl-BEA have the *BEA topology and are investigated to assess the effects of framework zinc versus aluminum because the former gives two framework charges per atom, whereas the latter, only one. Ni-CIT-6 and Ni–Zn-MCM-41 enable the comparison of a microporous to a mesoporous zincosilicate. Ni2+ ion-exchanged into zeolite Y has been previously reported to oligomerize propylene and is used here for comparison. Reaction data are obtained at 180 and 250 °C, atmospheric pressure, and WHSV = 1.0 h–1 in a feed stream of 85 mol % propylene (in inert). At these conditions, all catalysts are capable of oligomerizing propylene with steady-state conversions ranging from 3 to 16%. With the exception of Ni-HiAl-BEA, all catalysts have higher propylene conversions at 250 °C than at 180 °C. Both *BEA materials exhibit similar propylene conversions at each temperature, but Ni-HiAl-BEA is not as selective to C3n products as Ni-CIT-6. Zincosilicates demonstrate higher average selectivities to C3n products than the aluminosilicates at both reaction temperatures tested. Hexene products other than those expected by simple oligomerization are present, likely formed by double-bond isomerization catalyzed at acid sites. Additionally, both of the aluminosilicate materials catalyzed cracking reactions, forming non-C3n products. The reduced acidity of the zincosilicates relative to the aluminosilicates likely accounts for higher C3n product selectivity of the zincosilicates. Zincosilicates also exhibited higher linear-to-branched hexene isomer ratios (typically 1.0–1.5) when compared with the aluminosilicates, which had ratios on the order of 0.3. The mesoporous zincosilicate shows the best reaction behavior (including C3n product selectivity: ∼99% at both temperatures for Ni–Zn-MCM-41) of the catalytic materials tested here.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.